How to fix ” Word could not create the work file “

Sponsored Links

“Word could not create the work file” error message when you save a document in Microsoft Word

Applies to: Office Word 2007Microsoft Word 2010Word 2013Word 2016

Sponsored Links

How to fix Word could not create the work file

Symptoms


When you save a document in Microsoft Word, you receive the following error message:

Word could not create the work file. Check the Temp environment variable.
The Temporary Internet Files folder for Windows Internet Explorer is set to be in a location where you do not have permission to create new temporary files.

Resolution


To resolve this issue, create a new folder on your computer.

  1. Start Windows Explorer
  2. Locate the folder location C:\Users\<userprofile>\AppData\Local\Microsoft\Windows
  3. Create the folder labeled INetCacheContent.Word.

    Note: It may be necessary to turn on Hidden Items in the View Ribbon of Windows Explorer.

How to fix ” windows resource protection found corrupt files but was unable to fix some of them “

You will see this error :

Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.logHow to fix windows resource protection found corrupt files but was unable to fix some of them

Sponsored Links

Resolution

Method 1: In order to fix this issue, I would suggest you to refer the article given below and follow the steps from the link and check if it helps.

Note: This is also applies for windows 7:

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program generates in Windows Vista

http://support.microsoft.com/kb/928228

Method 2: Try to perform clean boot and check if any of the third party applications are causing the issue.

To find out which startup application is causing the issue. Please follow the steps below:

Clean Boot will help you start your computer by using a minimal set of drivers and startup programs so that you can determine whether a background program or any of the third party service is interfering with your program.

Steps to perform a Clean Boot:

1. Click Start on your Desktop

2. Type msconfig in the Start Search box and then press ENTER.

If you are prompted for an administrator password or for a confirmation, type the password, or click   Continue.

3. On the General tab, click Selective Startup.

4. Under Selective Startup, click to clear the Load Startup Items check box.

5. Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.

6. Click OK.

7. When you are prompted, click Restart.

If the computer boots fine after clean boot, then there are some non Microsoft applications causing the problem. To find out which application causing the problem refer from step 2 to step 6 in the article this is mentioned in the clean boot article.

http://support.microsoft.com/kb/331796

Once you find out the application which is causing the issue, i would suggest you to uninstall and reinstall the application.

To return your computer back to normal boot:

1. Click Start on your Desktop

2. Type msconfig in the Start Search box and then press ENTER.

If you are prompted for an administrator password or for a confirmation, type the password, or click   Continue.

3. Click the General tab.

4. Click Normal Startup – load all device drivers and services, and then click OK.

5. When you are prompted, click Restart to restart the computer.

For information on using “Clean Boot”, see the following Microsoft Article:

http://support.microsoft.com/kb/331796

Method 3: Try to perform disk cleanup to remove temporary files from the computer. To do so, please follow the steps below:

The following procedure cleans up files associated with your user account. You can also use Disk Cleanup to clean up all the files on your computer.

1.    Open Disk Cleanup by clicking the Start button. In the search box, type Disk Cleanup, and then, in the list of results, click Disk Cleanup.

2.    In the Drives list, click the hard disk drive that you want to clean up, and then click OK.

3.    In the Disk Cleanup dialog box, on the Disk Cleanup tab, select the check boxes for the file types that you want to delete, and then click OK.

4.    In the message that appears, click Delete files.

For more information, please refer the link mentioned below:

http://windows.microsoft.com/en-us/windows7/Delete-files-using-Disk-Cleanup

I hope this information helps. Please get back to us if you have any more questions about this issue.

Error 0x8007007B or 0x8007232b occurs when you try to activate Windows

Symptoms


When you try to activate a Windows installation (client or server), you receive one or more error messages that resembles the following.

Error message 1

Activation Error: Code 0x8007232b
DNS Name does not exist
Error 0x8007007B  or 0x8007232b occurs when you try to activate Windows

Error message 2

Windows could not be activated.
Key management services (KMS) host could not be located in domain name system (DNS), please have your system administrator verify that a KMS is published correctly in DNS.
Error: 0x8007232b 
Description: DNS name does not exist.

Error message 3

Error: 0x8007007B
The file name, directory name, or volume label syntax is incorrect

Resolution


To resolve this problem, use one or more of the following methods, as appropriate for your situation.

Method 1: Change the product key to an MAK

If KMS activation will not be used, and if there is no KMS server, the product key should be changed to an MAK. For Microsoft Developer Network (MSDN), or for TechNet, the stock-keeping units (SKUs) that are listed below the media are generally volume licensed-media, and the product key that’s provided is an MAK key.

To change the product key to an MAK, follow these steps:

Sponsored Links

 

1.Open an elevated command prompt. To do this, use one of the following methods, as appropriate for your OS.

  • Windows 7 or Vista (Windows Server 2003)

Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  • Windows 8.1, Windows 10, Windows Server 2012, and Windows Server 2012 R2

Press the Windows logo key+X, and then click Command Prompt (Admin). Or, right-click the Start button and then click Command Prompt(Admin). If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

2.At the command prompt, type the following command, and then press Enter:

slmgr -ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx 

Note The xxxxx-xxxxx-xxxxx-xxxxx-xxxxx placeholder represents your MAK product key.

Method 2: Configure a KMS host server for the clients to activate against

KMS activation requires that a KMS host server be configured for the clients to activate against. If there are no KMS host servers configured in your environment, install and activate one by using an appropriate KMS host server key. After you configure a computer on the network to host the KMS software, publish the Domain Name System (DNS) settings. For information about the KMS host server configuration process, see Set up a KMS host on a Windows Server 2008 R2 machine.

Tag : Error 0x8007007B or 0x8007232b occurs when you try to activate Windows

What is perfmon.exe and why it cause high cpu on your pc ?

Symptoms


On a Windows Vista or Windows 7 , you click the Resource Monitor button. Then, the Performance Monitor (Perfmon.exe) process may continuously start and stop. Additionally, Windows Vista may stop responding.

Note You click the Resource Monitor button to display the utilization details for the CPU, for memory, for the disk, and for the network.

Steps to reproduce the problem

  • You log on to a Windows Vista-based computer by using an account that has administrator credentials.
  • You disable the User Account Control (UAC) feature.
  • You log on to the Windows Vista-based computer on which UAC has been disabled. Additionally, you use an account that does not have administrator credentials.
  • On the Performance tab of the Windows Task Manager dialog box, you click the Resource Monitor button.

Resolution

PerfMon is a Performance Monitor application that will cause high CPU utilization.

To check if there is a scheduled PerfMon task

Click Start

type Perfmon in the search box

Select PerfMon

Expand Data Collector Sets

Expand User Defined

If there is a data Collection Set in the User Defined

Check the properties of it to see when it’s scheduled

Cause


This problem occurs because Perfmon.exe uses the ShellExecuteEx function. However, the ShellExecuteExfunction cannot use the Runas command correctly if the UAC feature is disabled.

How to Fix Windows 10 error 0x803F7001

If you see error code 0x803F7001, it means that a valid license couldn’t be found to activate Windows on your PC. This can happen for several reasons:

How to Fix Windows 10 error 0x803F7001

1.This is the first time Windows 10 has been installed on this PC.

In this case, you’ll need to provide a valid 25-character Windows 10 product key or purchase a Windows 10 digital license to activate. To buy a digital license online, select the Start  button > Settings  > Update & Security  > Activation , and then select Go to Microsoft Store. In Microsoft Store, follow the instructions to buy a license for Windows.

2.You changed the hardware on a previously activated Windows 10 PC.

A Windows license is associated with your PC hardware. If you make significant hardware changes, such as replacing your motherboard, Windows won’t be able to find a matching license the next time you start your PC.

If Windows was preinstalled on the PC, then a new license is required if you have made a change such as replacing the motherboard. To purchase a new Windows license, select the Start  button > Settings  > Update & Security  > Activation , and then select Go to Microsoft Store.

If you have a Windows product key you used on your PC before the hardware change, enter it by selecting the Start  button > Settings  > Update & Security  > Activation  and then selecting Change product key.

In addition, Microsoft provides an exception path for transferring a Windows License after a hardware change. You’ll need to be signed in to the same Microsoft account before making the hardware change and to use the exception path.

To access this exception path, the Start  button > Settings  > Update & Security  > Activation  and then select Troubleshoot. If the troubleshooter can’t resolve the issue, you’ll see a link to reactivate after a hardware change. Select it to follow this path. For more info, see Reactivating Windows 10 after a hardware change.

3.You reinstalled the wrong edition of Windows 10.

When you reinstall Windows 10 using a digital license, you’re asked to choose which edition to install. If you choose an edition other than the one you’re licensed to use, you may receive the above error.

If you think you installed the wrong edition, select the Start  button > Settings  > Update & Security  > Activation  and then select Troubleshoot. If the troubleshooter detects a valid Windows 10 digital license for an edition not current installed, it will let you know, and show you how to install the correct edition.

4.Your PC was purchased with Windows 10 preinstalled, and you’re receiving the 0x803F7001 activation error on first boot.

While rare, this can happen if there’s a manufacturing error where a proper Windows 10 product key wasn’t included in your PC’s hardware. Trying running the Activation Troubleshooter. Select the Start  button > Settings  > Update & Security  > Activation and then select Troubleshoot. If the troubleshooter can’t activate your PC, contact your PC’s manufacturer.

If your experience is different from those listed above, try the following:  

  • Run the Windows 10 Activation Troubleshooter: Start  button > Settings  > Update & Security  > Activation  and then select Troubleshoot.
  • Check if you have a paper copy of your Windows 25-character product key you can enter to activate Windows 10.
  • If your PC was recently repaired at an independent repair facility, contact them to see if the repairs require a new Windows 10 license.
  • If the PC is new and has never been activated, contact your PC manufacturer.Tag : How to Fix Windows 10 activation error 0x803F7001

What is Msdia80.dll file

Symptoms


You have a computer that is running a 64-bit operating system. You install the Microsoft Visual C++ 2005 Redistributable Package on this computer by using the Vcredist_x64.exe file or the Vcredist_ia64.exe file. When you do this, the Msdia80.dll file is installed in the root folder of the boot drive.
What is Msdia80.dll file

Note The correct path of the Msdia80.dll file is Drive:\Program Files\Common Files\Microsoft Shared\VC.

Resolution


Important This issue applies to a product that is no longer supported.

To resolve this issue, install the Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update on the computer that is experiencing this issue.

For more information about the Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update for your 64-bit operating system, visit the following Microsoft Download Center website:

Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=766a6af7-ec73-40ff-b072-9112bab119c2

Workaround


To temporarily work around this issue, move the Msdia80.dll file to the Drive:\Program Files\Common Files\Microsoft Shared\VC folder. Then, type the following command at a command prompt to register the Msdia80.dll file:

regsvr32 driver:\Program Files\Common Files\Microsoft Shared\VC\msdia80.dll

Tag : What is Msdia80.dll file

We can’t sign in to your account in Windows 10

If you try to sign in to Windows 10 and receive the error message, “We can’t sign in to your account,” Windows will create a temporary profile and sign you in to that one. Here are some things to try to fix ” We can’t sign in to your account “:

We cant sign in to your account in Windows 10

  • Before you begin troubleshooting, use an external drive to save any work you’ve done since your last successful sign-in. Any files you created or changed while in the temporary profile will be lost.

  • Restart your device and sign in again. Check to see if your settings and files are restored. You might need to restart your device more than once.

  • If multiple restarts don’t help, try temporarily disabling your anti-virus software or any other app that might scan your device during sign-in.

  • If the above didn’t help, there might be a problem with the system files on your device or your current profile. Here are some additional things to try:
  1. Run the System File Checker to check for system file corruption.
  2. If you still can’t sign in, try creating a new local administrator account, and then delete the account you’re unable to sign into.
  • If you still can’t sign in to your profile after these steps, we’d like to know. Please provide feedback using the Feedback Hub app on Windows 10 so that we can investigate the issue. (Feedback Hub is a public forum. Don’t include personal information in your comments.)

Tag : We can’t sign in to your account in Windows 10

How to fix ” there are currently no logon servers available to service the logon request “

How to fix ” there are currently no logon servers available to service the logon request “

there are currently no logon servers available to service the logon request

Symptoms of ” there are currently no logon servers available to service the logon request ” error


In an environment that relies on Windows Internet Name Service (WINS) to resolve NetBIOS names, the error message “There are no logon servers available to service the logon request” appears if you are an administrator and you do one or more of the following:

  • You attempt to remotely administer a trusted domain. For example, you use File Manager to assign share permissions to users from the trusted domain.
  • You attempt to select the trusted domain in User Manager for Domains.

Cause of ” there are currently no logon servers available to service the logon request ” error


The WINS database does not have the proper domain registrations for pass- through authentication. See the more information section below for more details.

This problem occurs most often in environments where the administrator has created a two-way trust between two previously independent domains. Most often, there are WINS servers in each domain and the WINS servers do not replicate their databases to each other.

Resolution


To resolve this problem:

  • Allow WINS dynamic registration.This ensures that Domain Controllers register their DOMAIN<1C> NetBIOS names with the WINS Server.
  • Make certain that WINS database replication is successful between WINS Servers. Missing database entries for domain names may indicate Problems with the WINS Servers and replication.

To work around this problem:

NOTE: Microsoft does not recommend using static mappings in the WINS database for WINS enabled computers.
  1. Run the WINS Administration Utility to add static mappings for the Domain<1C> registrations (of the trusted domain) that are not listed in the WINS database:
          Name:        Master DOMAIN Name
          IP Address:  Address of the Primary Domain Controller (PDC) of the domain
                       
          Type:        Domain Name
      
    

If you are logged on as an administrator at a Domain Controller, remote administration works now successfully. If you are attempting to remotely administer the domain while logged on to a Server (not a domain controller) or Windows NT Workstation, you must add DOMAIN<1C> entries for both the trusted and trusting domains.

More Information


To remotely administer a trusted domain, several pass-through authentication steps must take place. If the WINS database does not have the proper domain registrations, the pass-through authentication fails.

For example, a trust is established between DOMAIN_A and DOMAIN_B. Server PDC_A is in DOMAIN_A and PDC_B is in DOMAIN_B. DOMAIN_A is the trusted (master) domain, and DOMAIN_B is the resource (trusting) domain. To establish this trust relationship, the following NetBIOS names must be resolved to IP addresses, either through WINS or broadcast:

 NetBIOS Name   Description of Use of Name
 -------------------------------------------------------
 DOMAIN_A<1B>  PDC_B uses this to query the PDC of DOMAIN_A
 PDC_A<00>     PDC_B uses this to set up a session with the PDC of   DOMAIN_A    
 DOMAIN_A<1C>  PDC_B uses this to get DC list of DOMAIN_A               
  

With these three names being registered, and if your account has administrator priviledges, the trust can be established and the message “The trust relationship was established successfully” appears. When you reboot the computer, or the first time you attempt remote administration, another NetBIOS name is needed:

NetBIOS Name : DOMAIN_A<1C>

Description of Use of Name : Each Domain Controller in DOMAIN_B uses this name to establish a secure channel with a Domain Controller in the trusted domain.

The Domain Controller (DC) in the trusting domain attempts to create a secure channel with any DC in the trusted domain by making a multicast logon request to the NetBIOS name DOMAIN_A<1C>. This logon request is part of a process that creates a Secure Channel between the two DCs. The logon ID in this logon request is the inter-domain trust account for the trusting domain, DOMAIN_B$. If there is no registration for DOMAIN_A<1C> in the WINS database the error message STATUS_NO_LOGON_SERVERS is returned to the call. The message “There are currently no logon servers available” is then returned to the user.

Tag : there are currently no logon servers available to service the logon request

How to fix ” We couldn’t update system reserved partition ” error installing Windows 10

Symptoms


When upgrading to, or updating, Windows 10, you might encounter the error “We couldn’t update system reserved partition”, error code 0xc1900104, or error code 0x800f0922.
How to fix We couldn’t update system reserved partition error installing Windows 10

Cause of ” We couldn’t update system reserved partition ” error


The System Reserved Partition (SRP) may be full. The System Reserve Partition (SRP) is a small partition on your hard drive that stores boot information for Windows. Some third-party anti-virus and security apps write to the SRP, and can fill it up.

Resolution


Caution: these steps are complicated, and carry some risk. This is best done by advanced users with experience using the command line. If you make an error in entering these commands, you could put your device in a no-boot situation, and possibly lose data you have stored on the device.

To upgrade your device, you’ll need to free up 15MB of space on the SRP using the appropriate method below, and then try the upgrade again. If you’re updating Windows 10, you need to free up 13MB.

First, determine whether the SRP is GPT or MBR partition style:

  1. Press the Windows key + R. In the Run window that comes up, type diskmgmt.msc and press Enter.
  2. Press-and-hold or right-click on the Disk (such as Disk 0) that contains the SRP, and select Properties.
    that contains the SRP, and select Properties
  3. Choose the Volumes tab.
  4. The Partition Style: line will say either GUID Partition Table (GPT) or Master Boot Record (MBR).

Second, choose which method you need:

  • Windows 10 with GPT partition
    1. Search for cmd. Press-and-hold or right-click on Command Prompt in the results, and select Run as administrator.
    2. At the command prompt, type mountvol y: /s and then hit Enter. This will add the Y: drive letter to access the System Partition.
    3. Switch to the Y drive by typing Y: and press Enter. Then, navigate to the Fonts folder by typing cd EFI\Microsoft\Boot\Fonts. Once there, type del *.* to delete font files. The system may ask you if you are sure to continue, press Y and then Enter to continue.
  • Windows 10 with MBR partition
  1. Press the Windows key + R. In the Run window that comes up, type diskmgmt.msc and press Enter.
  2. Select the partition marked System Reserve. Press-and-hold or right-click on it.
  3. Select Change Drive Letter and Paths.
  4. Choose Add.
  5. Enter Y for the drive letter.
  6. Tap or click OK.
  7. From the Start menu, search for cmd. Right-click Command Prompt from the search results, and select Run as administrator.
  8. In the command prompt, type Y: and hit enter to switch to that drive. Then, navigate to the Fonts folder by typing cd Boot\Fonts.
  9. Type the following and press Enter:
    takeown /d y /r /f .
    Note: You must include the space and the period after the “f”, or the command will not work properly.
  10. Back up the permission to the drive by typing the following and press Enter:
    icacls Y:\* /save %systemdrive%\NTFSp.txt /c /t
    Note: Make sure that all files are showed as successful and none as failed.
  11. Type whoami and press Enter, and then record the user name. Type the following command and press Enter:
    icacls . /grant <username you got from whoami>:F /tNote: Do not put a space between the username and “:F”, or the command won’t work.
  12. Make sure you are still located in Fonts location (Y:\Boot\Fonts) as described in step 8. Then, Type del *.* to delete font files. The system may ask you if you are sure to continue, press Y and then enter to continue.

Restore permissions

    1. Type the following command and press Enter:
      icacls Y:\ /restore %systemdrive%\NTFSp.txt /c /t
    1. A message may display indicating some files failed while processing – this is normal as these files have been deleted subsequent to backing them up.
    1. If the amount of successful files is none, then the command was executed incorrectly; you must have some files successfully processed before continuing.
    1. Adjust the ACL back to System by typing the following and press Enter:
      icacls . /grant system:f /t
    1. Set the owner of the drive back to System by typing the following command and pressing Enter:
      icacls Y: /setowner “SYSTEM” /t /c
    1. Go back to Disk Management and Refresh the data to confirm if the SRP now has a greater percentage of free space. If so, the drive letter can be removed at this point.
    1. Right-click the System Reserved Partition.
    1. Select Change Drive Letter and Paths.
    1. Choose the Y: drive.
    1. Select Remove.
  1. Click OK.
  • Windows 7 or 8/8.1 with GPT partition
  1. Search for cmd. Press-and-hold or right-click on Command Prompt in the results, and select Run as administrator.
  2. At the command prompt, type mountvol y: /s and then hit Enter. This will add the Y: drive letter in order to access the System Partition.
  3. Type taskkill /im explorer.exe /f and press Enter. Then type explorer.exe and press Enter to restart explorer in Admin mode.
    Note While in this mode, some apps (such as OneNote) will not run.
  4. Open File Explorer and put Y:\EFI\Microsoft\Boot\ in the address bar and press enter.
  5. Select the language folders you want to remove and permanently delete them. They will be indicated by a set of four letters, split with hyphen. For example, en-US means U.S. English; de-DE means German.
  6. Optional: Remove unused font files at Y:\EFI\Microsoft\Boot\Fonts.
  7. After removing the files, reboot the device. This will remove the drive letter, and return explorer.exe to a normal mode.
  • Windows 7 with MBR partition

This makes a permanent, but small, increase in the available space of the SRP.

  1. Remove language folders
    1. Press the Windows key + R. In the Run window that comes up, type diskmgmt.msc and press Enter.
    2. Select the partition marked System Reserve. Press-and-hold or right-click on it.
    3. Select Change Drive Letter and Paths.
    4. Choose Add.
    5. Enter Y for the drive letter.
    6. Tap or click OK.
    7. From the Start menu, search for cmd. Right-click Command Prompt from the search results, and select Run as administrator.
    8. In the command prompt, type Y: and hit enter to switch to that drive.
    9. Type the following and press Enter:
      takeown /d y /r /f .Note You must include the space and the period after the “f”, or the command will not work properly.
    10. Back up the permission to the drive by typing the following and press Enter:
      icacls Y:\* /save %systemdrive%\NTFSp.txt /c /tNote: Make sure that all files are showed as successful and none as failed.
    11. Type whoami and press Enter, and then record the user name. Type the following command and press Enter:
      icacls . /grant <username you got from whoami>:F /t

      Note: 
      Do not put a space between the username and “:F”, or the command won’t work.
    12. Open the SRP drive in File Explorer and access the Boot folder, select the language folders you want to remove and permanently delete them. They will be indicated by a set of four letters, split with hyphen. For example, en-US means U.S. English; de-DE means German.
  2. Truncate the NTFS Log
    1. Check the size of the NTFS Log first. From the Command Prompt, type the following and press Enter:
      chkdsk /L Y:

      • If the size is less than 5000KB, you do not need to truncate the file.
    2. To truncate the file, type the following and press Enter:
      chkdsk /L:5000 /X /F
    3. Go back to the Disk Management window. Tap or click the Action menu, and select Refresh. Confirm if the SRP has now a greater percentage of free space. If so, press-and-hold or right-click the System Reserve Partition, and select Change Drive Letter and Paths. Select Y: and choose Remove.
  3. Resize the USN journal, if truncating the NTFS Log doesn’t increase the free space in the SRP.
    1. From the Command Prompt, type the following and press Enter:
      fsutil usn queryjournal Y:

      • This will display the size in hex value. Convert the value to decimal and divide by 1048576, the result will be in MB. (To convert Hex to Decimal: Open the Calculator in Windows, select the View menu, and then choose Programmer. Select Hex, enter the Hex value, and then select Dec)
      • If the journal is 30MB or more, continue with truncating it.
    2. Delete the journal by typing the following command and pressing Enter:
      fsutil usn deletejournal /D /N Y:
    3. Recreate the journal with a new log size value:
      fsutil usn createjournal m=1500 a=1 Y:
  4. Restore permissions
    1. Type the following command and press Enter:
      icacls Y:\ /restore %systemdrive%\NTFSp.txt /c /t

      • A message may display indicating some files failed while processing – this is normal as these files have been deleted subsequent to backing them up.
      • If the amount of successful files is none, then the command was executed incorrectly; you must have some files successfully processed before continuing.
    2. Adjust the ACL back to System by typing the following and press Enter:
      icacls . /grant system:f /t
    3. Set the owner of the drive back to System by typing the following command and pressing Enter:
      icacls Y: /setowner “SYSTEM” /t /c
    4. Go back to Disk Management and Refresh the data to confirm if the SRP now has a greater percentage of free space. If so, the drive letter can be removed at this point.
    5. Right-click the System Reserved Partition.
    6. Select Change Drive Letter and Paths.
    7. Choose the Y: drive.
    8. Select Remove.
    9. Click OK.
  • Windows 8/8.1 with MBR partition

This creates a larger, but temporary, increase in the available space of the SRP

  1. Make sure you have an external drive, formatted as NTFS, with at least 250MB of free space.
  2. Press the Windows key + R. In the Run window that comes up, type diskmgmt.msc and press Enter.
  3. Select the Recovery Partition. Press-and-hold or right-click on it.
  4. Select Change Drive Letter and Paths.
  5. Choose Add.
  6. Enter Y for the drive letter.
  7. Tap or click OK.
  8. From the Start screen, swipe in from the right and select the Search charm, or just start typing to search for cmd. Press-and-hold or right-click Command Prompt from the search results, and select Run as administrator.
  9. In the command prompt, type Y: and hit enter to switch to that drive.
  10. Type the following and press Enter:
    takeown /d y /r /f .

    Note
     You must include the space and the period after the “f”, or the command will not work properly.
  11. Type whoami and press Enter, and then record the user name. Type the following command and press Enter:
    icacls . /grant <username from whoami>:F /t

    Note: 
    Do not put a space between the username and “:F”, or the command won’t work.
  12. When that command completes, type or paste the following and then press Enter:
    attrib -s -r -h Y:\Recovery\WindowsRE\winre.wim
  13. Open File Explorer, and note the drive letter of the external drive you are using (for the rest of these instructions, we will use the example F: – wherever you see F: in these steps, it really means the drive letter of the external drive).
  14. In the Command Prompt, type the following and press Enter:
    mkdir F:\Recovery\WindowsRE
  15. Next, type the following and press Enter:
    xcopy Y:\Recovery\WindowsRE\winre.wim F:\Recovery\WindowsRE\winre.wim /h
  16. Map the new path by inputting the following command and then pressing Enter:
    C:\Windows\System32\Reagentc /SetREImage /Path F:\Recovery\WindowsRE /Target C:\Windows
  17. Once verified the copy was made successfully, type the following and press Enter:
    del Y:\Recovery\WindowsRE\winre.wim /F
  18. Go back to the Disk Management window. Tap or click the Action menu, and select Refresh. Confirm if the SRP has now a greater percentage of free space. If so, continue with the upgrade.
  19. Once the upgrade has completed, move the wim file back to the Recovery Partition and re-map the location:
    1. From the Command Prompt, type the following and press Enter:
      xcopy F:\Recovery\WindowsRE\winre.wim Y:\Recovery\WindowsRE\winre.wim /h
    2. Re-map to the original path. Type the following and press Enter:
      C:\Windows\System32\Reagentc /SetREImage /Path Y:\Recovery\WindowsRE /Target C:\Windows
  20. Go back to the Disk Management window. Press-and-hold or right-click the Recovery Partition, and select Change Drive Letter and Paths. Select Y: and choose Remove.Tag : How to fix ” We couldn’t update system reserved partition ” error installing Windows 10

How to Fix Bluetooth Problems in Windows 10

How to Fix Bluetooth Problems in Windows 10

Connecting your Windows 10 PC to different Bluetooth devices lets you do a lot of things on your PC. For example, you can:
  • Use a Bluetooth mouse or keyboard.
  • Share files over Bluetooth with other tablets, laptops, PCs, and phones.
  • Play music over Bluetooth speakers or headphones.
  • Use Speech on your PC.
  • Track your fitness by using a fitness sensor.

How to Fix Bluetooth Problems in Windows 10

These are question about bluetooth problems in Windows 10 .

1.How can I try to automatically fix common Bluetooth problems?

If you’re running Windows 10 (Version 1703), use the Bluetooth troubleshooter to try to fix Bluetooth problems.

  • Select the Start  button, then select Settings  > Update & security  > Troubleshoot.
  • Under Find and fix other problems, select Bluetooth > Run the troubleshoote

2.The Bluetooth toggle is missing in Bluetooth & other devices settings or can’t be turned on. How can I try to fix this?

Check Device Manager to make sure you have the latest Bluetooth drivers installed.

  • In the search box on the taskbar, type Device Manager, select it from the list of results, and then expand Bluetooth in Device Manager.
  • Press and hold (or right-click) the Bluetooth radio, then select Update driver > Search automatically for updated driver software.

3.Bluetooth doesn’t appear and there are no unknown devices listed in Device Manager. How can I fix this?

If you know your PC has Bluetooth hardware but you don’t see it in Device Manager, or you don’t see any unknown devices under Other devices in Device Manager, there might be a problem with a related device. Try the following to get Bluetooth working:

  • In the search box on the taskbar, type Device Manager, and select it from the list of results.
  • In Device Manager, select View > Show hidden devices.
  • In Device Manager, select View > Devices by connection.
  • Find your Bluetooth hardware.

    As shown in the following image, your Bluetooth hardware might be under a related parent device which indicates there’s a problem. (You may need to expand devices that are collapsed and shown with an arrow next to them.)

Bluetooth hardware

  1. Parent device
  2. Bluetooth device
  • To try to troubleshoot and fix the problem, do one or more of the following:

Update the driver. To do this, press and hold (or right-click) the parent device, then select Update driver > Search automatically for updated driver software.

Uninstall the driver and then restart your PC. To uninstall the device, press and hold (or right-click) the parent device, then select Uninstall device. To restart your PC, select the Start  button > Power  > Restart.

Before your PC restarts, you might temporarily lose the connection to other devices. For example, you might temporarily lose the connection to other USB devices.

After your PC restarts, Windows will automatically install the default driver.

Download an updated driver from the PC manufacturer’s website, and then install it manually. To install a driver you’ve downloaded from the manufacturer’s website, right-click (or press and hold) the parent device, then select Update driver > Browse my computer for driver software and then find the driver you downloaded on your PC.

4.My Bluetooth device shows as Paired, but it isn’t working. How do I fix this?

In Windows 10, the status text for Bluetooth devices changed in Settings  > Devices  > Bluetooth & other devices . Bluetooth devices will only show as Connected when the device is actually in use (for example, a Bluetooth speaker that’s connected and has music playing over it). When the device isn’t being used, the status text will show as Paired.

If your Bluetooth device isn’t working, you can try removing the device and pairing it again. In Bluetooth settings, select the Bluetooth device that’s paired but not working > Remove device > Yesto verify. After that, pair the device again.

5.Help… I can’t  send or receive files over Bluetooth

If you’re having problems sharing files over Bluetooth, here are some things to try to fix it:

  • Make sure your PC and other device are paired. On your PC, select the Start  button > Settings  > Devices  > Bluetooth & other devices , and make sure the other device shows as Paired in the list of devices. For more info about pairing devices, see Connect to Bluetooth devices.
  • Windows 10 supports the Bluetooth Object Push Profile (OPP), which it uses when sending and receiving files. Make sure the other device supports the OPP profile too. To see if it does, visit the device manufacturer’s website or search the web. For a list of supported Bluetooth profiles in Windows 10, see Supported Bluetooth profiles.
  • To receive a file, you need to be on the Waiting for connection screen in Bluetooth File Transfer on your PC. Here’s how to get to it:
    1. Select the Start   button > Settings  > Devices  > Bluetooth & other devices  >Send or receive files via Bluetooth.
    2. In Bluetooth File Transfer, select Receive files.
  • When sending and receiving files, make sure both your PC and the other device stay on and don’t go to sleep.

6.I updated my PC to a newer version of Windows 10, and now my Bluetooth device doesn’t work anymore. How can I fix this?

If a Bluetooth device uses a customized Bluetooth profile, the device might not work after your PC is updated. You’ll need to pair the Bluetooth device again to use it.

Bluetooth devices that use one of the supported Bluetooth profiles should still be paired and work properly.

Tag : bluetooth driver windows 10 , Bluetooth Problems in Windows 10