How to fix “Windows 10 start button not working”

Sponsored Links

People who upgraded to Windows 10 are finding out that their Start Button is not working or Start Menu does not open . If your Start Menu isn’t working, you can try these ways to fix it .

How to fix Windows 10 start button not working

#Method 1 : Use Windows Explorer

A treatment for the symptom would be to restart Windows Explorer every time this happens. This may allow you to use the Windows button until the next time that it freezes up.

-You open task manager (alt-ctrl-del or right click on taskbar and choose it)

-You find and select “Windows Explorer”

-You click Restart button on bottom right

Sponsored Links

#Method 2 : Run Windows PowerShell

1. You launch Task manager

Press the [Ctrl] + [Alt] + [Del] keys on the keyboard at the same time, or right click the Taskbar, and select Task manager.

2. You run a new Windows task

When the Task manager window opens, click the More details option to expand it, then select Run new task from the File menu.

3. You run Windows PowerShell

When the Run new task dialog box opens, type powershell, tick the box for Create this task with administrative privileges and click OK.

4. You run the System File Checker

Type sfc /scannow into the window and press the [Return] key. The scan may take some time and will end with one of three results. Windows did not find any integrity violations and Windows Resource Protection found corrupt files and repaired them mean there are now no corrupt files, but Windows Resource Protection found corrupt files but was unable to fix some (or all) of them indicates a problem.

In this latter case, type (or copy and paste) DISM /Online /Cleanup-Image /RestoreHealth into the PowerShell window and press the [Return] key. This will download files from Windows Update to replace the corrupt ones and, again, this may take some time.

  Tag : How to fix “Windows 10 start button not working” , windows start button not working windows 10

1 vote, 5.00 avg. rating (98% score)

Avast Premier Activation Code

I will give you Avast premier activation code

AGHSPE-982YJJ-5YU56N

XHZ8FT-JUAKMJ-4KL496

Avast cleanup activation code

433U4Y-TWQESJ-4KL47W

Sponsored Links

Activate your Avast by inserting this license key into the program:

  1. Open your Avast interface and go to settings (cog wheel icon in the top-right corner) » ‘Subscription‘. You can also get there by right-clicking on the systray Avast icon and selecting ‘Registration information
  2. Click on ‘Insert activation code
  3. Enter the license key above (AGHSPE-982YJJ-5YU56N) and confirm by clicking ‘OK
  4. Now you should be able to use the free protection for the full year valid until 12/26/2018. You can check the subscription details in the ‘Subscription‘ areaAvast Premier Activation Code

Features of Avast Premier

  • Keep spies and snoops off your webcam
  • Keep hostage-takers off your files
  • Update your apps against security gaps
  • No data left behind
  • Antiphishing
  • Home Network Security
  • Vulnerability Protection
  • Optimized Scan
  • Registry Cleanup
  • Silent Mode

Tag : avast cleanup activation code , Avast Premier Activation Code , Avast Premier License Key , avast free , avast free antivirus

1 vote, 5.00 avg. rating (98% score)

How to Recover an Unsaved Excel File

How to Recover an Unsaved Excel File

We have experienced a situation where we have created a Excel file and then accidentally closed it out without saving it. Is it lost forever? Do I have to recreate the entire file over? Those are just a few of the questions that will be flying around in your head. Take a deep breath, and follow the steps below to recover your excel file.

1.You click the File tab => Info =>  Manage Documents.

How to Recover an Unsaved Excel File

2.You select “Recover Unsaved Workbooks” from the drop-down menu.

How to Recover an Unsaved Excel File

3.Click “Open” when you’ve selected the file you want to recover.

4.Click the Save As button and save your Excel file .

You also recover overwritten Excel files

You click on the FILE tab =>  Info  => Manage Versions button you’ll see all autosaved versions of your file.

recover overwritten Excel files

Sponsored Links

Excel automatically saves versions of the workbook at specified intervals, but only if you’ve made changes to your spreadsheet between these intervals. The name of each version has a date, time and the “(autosave)” note. When you click any of them, it will open along with the most current version of your workbook so that you can compare them and see all the changes.

If the program closed incorrectly, the last autosaved file is labeled with the words (when I closed without saving).

1 vote, 5.00 avg. rating (98% score)

How to Recover an Unsaved Word Document

Applies to : Microsoft Word 2010, Word 2013, and Word 2016

We have experienced a situation where we have created a Word document and then accidentally closed it out without saving it. Is it lost forever? Do I have to recreate the entire document over? Those are just a few of the questions that will be flying around in your head. Take a deep breath, and follow the steps below to recover your document.

How to recover an unsaved Word document

1.You click the File tab => Info =>  Manage Documents.

How to Recover an Unsaved Word Document

2. You select “Recover Unsaved Documents” from the drop-down menu.

Recover Unsaved Documents

3.Click “Open” when you’ve selected the document you want to recover.

document you want to recover

4.Click the Save As button and save your Word document.

Change the setting AutoRecover Word

If you would like change the frequency with which Microsoft Word automatically saves a recoverable copy of your document, follow the steps below. The default time is set to 10 minutes.

  1. Click the File tab => Options.
  2. In the Options dialog box you click the Save option located on the left side.Change the setting AutoRecover Word
  3. Under Save documents change the minutes to how often you would like Word to save a recoverable version of your document.
  4. When finished click OK

Here’s hoping that you are able to recover all of your work!

Tag : How to Recover an Unsaved Word Document

2 votes, 5.00 avg. rating (98% score)

How to fix error code 0x8024402C when you try to install updates on Windows Update

Symptoms of error code 0x8024402C


When you try to connect to the Microsoft Windows Update Web site or to the Microsoft Update Web site to install updates, you may receive the following error code:

0x8024402C
How to fix error code 0x8024402C when you try to install updates on Windows Update

Cause of error code 0x8024402C


This issue may occur if proxy or firewall settings are configured incorrectly. In this case, the connection on the client computer to the Windows Update servers fails.

Resolution of error code 0x8024402C


To resolve this issue, use the following methods in the order in which they are presented. If method 1 does not resolve this issue, go to method 2.

Method 1: Remove characters from the proxy exception list, and then clear the proxy cache

To do this, follow these steps, as appropriate for the operating system that you are running.

Windows 2000, Windows XP, and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

    Note If the menu is not available in the Internet Explorer window, press the ALT key on the keyboard to display the menu.

  3. Click the Connections tab, click LAN Settings, and then click Advanced.
  4. Delete any entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, click Run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
    • proxycfg -d
    • net stop wuauserv
    • net start wuauserv
  8. Try to install the updates again.

Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

    Note If the menu is not available in the Internet Explorer window, press the ALT key on the keyboard to display the menu.

  3. On the Connections tab, click LAN Settings, and then click Advanced.
  4. Delete any entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click StartStart button , and then type cmd in the Start Search box.
  7. In the search results list, right-click Cmd.exe, and then click Run as Administrator.

    User Account Control permission  If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

  8. Type the following commands. Press ENTER after each command.
    • netsh winhttp reset proxy
    • net stop wuauserv
    • net start wuauserv
  9. Try to install the updates again.

Method 2: Enable the “Automatically detect settings” option in Internet Explorer

To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

    Note If the Tools menu is unavailable in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN Settings.
  4. Click to select the Automatically detect settings check box, and then click OK.
  5. Try to install updates again.
0 votes, 0.00 avg. rating (0% score)

How to fix “Unable to reach Windows activation servers” error

Summary of “Unable to reach Windows activation servers” error


You may encounter this error if the following are true:

On Windows 10 running either the RTM build or the later Version 1511, you had the motherboard replaced by the Original Equipment Manufacturer (OEM), after which your PC activated successfully.

How to fix “Unable to reach Windows activation servers” error

You then installed the Windows 10 Anniversary Update (Version 1607) Current Branch for Business (CBB)released January 19, 2017 using Windows Update, the Windows 10 ISO, or the Windows 10 download tools. You then noticed that the Activation setting page shows the error “Unable to reach Windows activation servers”.

Your PC is unaffected in any other way.

Cause of “Unable to reach Windows activation servers” error


The Windows 10 Anniversary Update (Version 1607) CBB does not include a motherboard replacement improvement that was later included in the Windows 10 Creators Update released in March of 2017.

Resolution of “Unable to reach Windows activation servers” error


  1. Update to the Windows 10 Creators Update. This is normally done using the Windows Update settings page and selecting Check for Updates. You can also do this by visiting the Windows 10 download page and clicking the Update now button. This is the preferred method as you will get the latest updates for Windows 10 as well.
  2. If the scenario applies and your motherboard was replaced by your OEM, you can also solve this issue by entering the default product key that matches your edition of Windows. This key will not activate your PC, but will prompt your PC to re-activate using an already-associated digital license.To do this:
    1. Make sure you are connected to the internet for this process.
    2. From Start, open Settings, select Update and Security, and choose Activation from the left menu.
    3. Select Change Product Key.
    4. Enter the Default Product key that matches your Windows Edition
      • Windows 10 Home Edition YTMG3-N6DKC-DKB77-7M9GH-8HVX7
      • Windows 10 Home Edition Single Language BT79Q-G7N6G-PGBYW-4YWX6-6F4BT
      • Windows 10 Pro Edition VK7JG-NPHTM-C97JM-9MPGT-3V66T
      • Windows 10 Home N Edition 4CPRK-NM3K3-X6XXQ-RXX86-WXCHW
      • Windows 10 Pro N Edition 2B87N-8KFHP-DKV6R-Y2C8J-PKCKT
    5. Choose Next. Windows 10 should now show as Activated.

      Tag : How to fix “Unable to reach Windows activation servers” error

1 vote, 5.00 avg. rating (98% score)

How to fix ” not enough storage is available to process this command ” error

Symptoms


When you access shared items on a Windows NT server from a Windows NT client, you may receive the following error message:

Not enough server storage is available to process this command.

The following events may also be logged:

Event ID: 2011Event ID: 0

How to fix not enough storage is available to process this command

Cause of ” not enough storage is available to process this command ” error


This issue may occur if the IRPStackSize registry entry on the server is set too low.

Resolution of ” not enough storage is available to process this command “error


Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

To resolve this issue, increase the value of the IRPStackSize registry entry. To do this, follow these steps:

  1. Click Start, click Run, type regedit, and then click OK.
  2. Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters

    If the IRPStackSize entry is not present in this subkey, follow these steps:

    1. Click Edit, point to New, and then click DWORD Value.
    2. Type IRPStackSize, and then press ENTER.NoteType IRPStackSizeexactly as it appears. The value name is case sensitive.
  3. Click IRPStackSize, click Edit, and then click Modify.
  4. In the Data Value box, type a larger value, and then click OK.Note Values may range from 0x1 to 0xC. These values are equivalent to 1 to 12 in decimal notation.

If the problem persists after you complete the previous procedure, increase the value of IRPStackSize more.

Tag : not enough storage is available to process this command

0 votes, 0.00 avg. rating (0% score)

Distributed link tracking client sever

Summary


This article describes how you can use the Distributed Link Tracking services in Windows to track the creation and movement of linked files across NTFS-formatted volumes and servers.
Distributed link tracking client sever

An overview of Distributed Link Tracking

You can use the Distributed Link Tracking Server service and the Distributed Link Tracking Client service to track links to files on NTFS-formatted partitions. Distributed Link Tracking tracks links in scenarios where the link is made to a file on an NTFS volume, such as shell shortcuts and OLE links. If that file is renamed, moved to another volume on the same computer, moved to another computer, or moved in other similar scenarios, Windows uses Distributed Link Tracking to find the file. When you access a link that has moved, Distributed Link Tracking locates the link; you are unaware that the file has moved, or that Distributed Link Tracking is used to find the moved file.

Distributed Link Tracking consists of a client service and a server service. The Distributed Link Tracking Server service runs exclusively on Windows Server-based domain controllers. It stores information in Active Directory, and it provides services to help the Distributed Link Tracking Client service. The Distributed Link Tracking Client service runs on all Windows 2000-based and Microsoft Windows XP-based computers, including those in workgroup environments or those that are not in a workgroup. It provides the sole interaction with Distributed Link Tracking servers.

Distributed Link Tracking clients occasionally provide the Distributed Link Tracking Server service with information about file links, which the Distributed Link Tracking Server service stores in Active Directory. Distributed Link Tracking clients also may query the Distributed Link Tracking Server service for that information when a shell shortcut or an OLE link cannot be resolved. Distributed Link Tracking clients prompt the Distributed Link Tracking server to update links every 30 days. The Distributed Link Tracking Server service scavenges objects that have not been updated in 90 days

When a file that is referenced by a link is moved to another volume (on the same computer or on a different computer), the Distributed Link Tracking client notifies the Distributed Link Tracking server, which creates a linkTrackOMTEntry object in Active Directory. A linkTrackVolEntry object is created in Active Directory for every NTFS volume in the domain.

Note: In Windows Server 2008 and newer, the Distributed Link Tracking Server Service is not included in Windows anymore. So you can safely remove the objects from Active Directory.

Distributed Link Tracking and Active Directory

Distributed Link Tracking objects are replicated among all domain controllers in the domain that is hosting the computer account and all global catalog servers in the forest. The Distributed Link Tracking Server service creates objects in the following distinguished name path:

CN=FileLinks,CN=System,DC=domain name container of Active Directory

Distributed Link Tracking objects exist in the following two tables under the CN=FileLinks,CN=System folder:

  • CN=ObjectMoveTable,CN=FileLinks,CN=System,DC=domain name:

    This object stores information about linked files which have been moved in the domain.

  • CN=VolumeTable,CN=FileLinks,CN=System,DC=domain name:

    This object stores information about each NTFS volume in the domain.

Distributed Link Tracking objects consume very little space individually, but they can consume large amounts of space in Active Directory when they are allowed to accumulate over time.

If you disable Distributed Link Tracking and delete the Distributed Link Tracking objects from Active Directory, the following behavior may occur:

  • Active Directory database size may be reduced (this behavior occurs after the objects have been tombstoned and garbage collected, and after you perform an offline defragmentation procedure).
  • Replication traffic between domain controllers may be reduced.

Distributed Link Tracking Server service defaults on Windows Server-based domain controllers

In Windows 2000, Windows XP, and Windows Server 2003, the start value for the Distributed Link Tracking Client service is set to Automatic. On Windows 2000-based servers, the Distributed Link Tracking Server service starts manually, by default. However, if you use Dcpromo.exe to promote a server to a domain, the Distributed Link Tracking Server service is configured to start automatically.

For Windows Server 2003-based servers, the Distributed Link Tracking Server service is disabled by default. When you use Dcpromo.exe to promote a server to a domain, the Distributed Link Tracking Server service is not configured to start automatically. When a Windows 2000-based domain controller is upgraded to Windows Server 2003, the Distributed Link Tracking Server service is also disabled during the upgrade. If you are an administrator and you want to use the Distributed Link Tracking Server service, you must either use Group Policy or you must manually set the service to start automatically. In addition, the Distributed Link Tracking Client service on computers that are running Windows Server 2003 or Windows XP SP1 does not try to use the Distributed Link Tracking Server service by default. If you want to configure those computers to take advantage of the Distributed Link Tracking Server service, enable the Allow Distributed Link Tracking clients to use domain resources policy setting. To do so, open the Computer Configuration/Administrative Templates/System node in Group Policy.

Tag : Distributed link tracking client sever

1 vote, 5.00 avg. rating (98% score)

How to use Snipping Tool and take a screenshot

How to use Snipping Tool and take a screenshot

#Method 1 : Use Mouse and keyboard

  1. To open Snipping Tool, select the Start  button, type snipping tool, and then select it in the search results.

  2. To choose the type of snip you want, select Mode (or, in older versions of Windows, the arrow next toNew), and then choose Free-formRectangularWindow, or Full-screen Snip. When making free-form or rectangular snips, use your mouse to select the area that you want to capture.

    How to use  Snipping Tool and take a screenshot
  3. To take a new screenshot using the same mode you used last, select New.

  4. Use the Save and Copy buttons at the top of the snip to save or copy it to the clipboard.

#Method 2 : Keyboard only

  1. To open Snipping Tool, press the Start  key, type snipping tool, and then press Enter. (There’s no keyboard shortcut to open Snipping Tool.)
  2. To choose the type of snip you want, press Alt + M keys and then use the arrow keys to choose Free-formRectangularWindow, or Full-screen Snip, and then press Enter. (Alt + M is available only with the latest update to Windows 10). When making a rectangular snip, hold down Shift and use the arrow keys to select the area you want to snip.

  3. To take a new screenshot using the same mode you used last, press Alt + N keys.

  4. To save your snip, press Ctrl + S keys. To copy it to the clipboard, press Ctrl + C keys.

    Tag : snipping tool download windows 10

1 vote, 5.00 avg. rating (98% score)

How to fix ” background installation ran into a problem “

Applies to: Office Home and Business 2013Office Home and Student 2013Office Professional 2013

If you are receiving this error when you attempt to install Office 2013 or Office 365:

“Background installation ran into a problem: Please make sure you’re still connected to the internet, or try connected to a different network”

How to fix background installation ran into a problem

You can fix it by following these steps:

  1. Restart your computer.
  2. Download and run this Fix it to remove Office 2013 or Office 365:

Click here to download it

  1. Note This Fix it applies to Office 365 Preview, Office 365 and Office 2013.IMPORTANT When you download the troubleshooter, click Save in the File Download dialog box
    Save in the File Download dialog box

    When it’s done, click Open folder, find the file (the name should start with O15CTRRemove) and double-click it to run the troubleshooter. If you click Open, you may have problems running the troubleshooter.

  2. Attempt to install Office from your My Account page.
1 vote, 5.00 avg. rating (98% score)