How to fix no internet secured windows 7/8/10

We generally use a secure Wi-Fi connection at our home/office. So, if we get a “No internet, Secured” error, this could be because of an invalid IP configuration. Maybe something changed the settings. here is what you can do.

#Method 1. Update your Network Adapter  software then restart them to fix no internet secured

This helps create a new connection to your Internet service provider (ISP). When you do this, everyone that is connected to your Wi-Fi network will be temporarily disconnected.

The steps you take to restart your modem and router can vary, but here are the general steps:

  1. Unplug the power cable for the router from the power source.
  2. Unplug the power cable for the modem from the power source.Some modems have a backup battery. So if you unplug the modem and lights stay on, remove the battery from the modem.
  3. Wait at least 30 seconds or so.If you had to remove the battery from the modem, put it back in.
  4. Plug the modem back into the power source. The lights on the modem will blink. Wait for them to stop blinking.
  5. Plug your router back into the power source.Wait a few minutes for the modem and router to fully power on. You can usually tell when they’re ready by looking at the status lights on the two devices.
  6. On your PC, try to connect again.

#Method 2 : Check the basics on your PC to fix no internet secured

  • Make sure Wi-Fi is turned on.
    1. On a laptop, open Windows Mobility Center by selecting the Start

      button and then selecting Control Panel Mobile PC Windows Mobility Center.

    2. Look in the Wireless Network section. If Wi-Fi is on, the button should say Turn wireless off.
  • Make sure the physical Wi‑Fi switch on your laptop is turned on. (An indicator light usually shows when it’s on.)
  • Check and make sure your PC isn’t in airplane mode.
  • Move closer to the router or access point if you can.
  • If you don’t see the network name at all, the router or access point might not be set to broadcast the network name. In this case, you’ll need to connect to it manually.
    1. Open Manage Wireless Networks by selecting the Start

      button, and then selecting Control Panel. In the search box, type wireless and then select Manage wireless networks.

    2. Select Add, and then select Manually create a network profile.
    3. Type the network information.
    4. If you want Windows to automatically connect when the network is in range, select the Start this connection automatically check box.
    5. Select the Connect even if the network is not broadcasting check box, select Next, and then select Close.
  • The network will be added to your list of networks and will be available to connect to when your computer is in range of the network. To connect to the network, follow these steps:
    1. Open Connect to a Network by selecting the network icon in the notification area.
    2. Select Unnamed Network, select Connect, and then type the network information. The network will be added to your list of networks and will be available to connect to in the future when your computer is in range of the network..

#Method 3 : Use the Network Troubleshooter to fix no internet secured

Let Windows try to help you fix the problem. Try running the Network troubleshooter to see if it can diagnose and fix the problem.

Open the Network troubleshooter by right-clicking the network icon in the notification area and then selecting Troubleshoot problems.

#Method 4 : Contact with Internet service provider to fix no internet secured

  1. Select the Start button

    . Type cmd in the search box, right-click cmd in the list, select Run as administrator, and then select Yes.

  2. At the command prompt, type ipconfig.Look for the IP address listed next to Default gateway. Write down that address if you need to. For example, 192.168.1.1.
  3. At the prompt, type ping <Default gateway> and press Enter. For example, type ping 192.168.1.1 and press Enter.The result should be something like this:Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
    Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
    Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
    Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
    Ping statistics for 192.168.1.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 4ms, Maximum = 5ms, Average = 4ms
If the ping is successful and you see results similar to the results above, but you can’t connect to the Internet on your PC, there may be a problem with your modem or Internet service provider (ISP).

#Method 5 : Check your network adapter to fix no internet secured

1. Go to Control Panel >Network and InternetNetwork Connections

2. Choose your wifi connection, right-click and select Properties

3. In the Wi-Fi Properties, in the “This connection uses the following items:” tab, you should check the following options:

  •     Client for Microsoft Networks
  •     File and Printer Sharing for Microsoft Networks
  •     Link-Layer Topology Discovery Mapper I/O Driver
  •     Internet Protocol Version 4 (TCP/IPv4)
  •     Reliable Multicast Protocol
  •     Internet Protocol Version 6 (TCP/IPv6) ( You should uncheck it )
  •     Link-Layer Topology Discovery Responder

How to fix no internet secured windows 7810

#Method 6 : Check your driver of PC or laptop to fix no internet secured

You can use DriverEasy to update your driver .

#Method 7 : Disable and then enable your connect to fix no internet secured

If it doesn’t change for the moment, try to disable and then enable your connect .

You go control panel => Network and Internet => Change adapter setting =>disable connect then reconnect

disable connect.jpg

#Method 8 : Other steps to try on your router to fix no internet secured

Here are some things to check and try with your router if you’re at home and having trouble getting connected.

  • If you don’t see the network name, sign in to your router and check to see if it’s set to broadcast the network name.
    1. Connect your PC to your router using an Ethernet cable.
    2. Open your web browser and type the IP address for your wireless router. (For example, 192.168.1.1 or 172.16.0.0—check the documentation for your router to find the default IP address.)
    3. Sign in with your user name and password, then make sure an option labeled Enable SSID BroadcastWireless SSID broadcast, or something similar is turned on. This setting is often on a Wireless Settings page.
  • Check to see if your Wi-Fi network uses Media Access Control (MAC) address filtering for security. If it does, you’ll need to add the MAC address for your PC to the access list on your router before you can connect.
    1. Select the Start button. Type cmd in the search box and right-click cmd in the list. Select Run as administrator, and then select Yes.
    2. At the command prompt, type ipconfig /all.Write down the address that appears next to Physical Address for your wireless network adapter. This is the address you’ll need to add to the access list on your router.

    To add the MAC address to the access list on your router:

    1. Open your web browser and type the IP address for your wireless router. (For example, 192.168.1.1 or 172.16.0.0—check the documentation for your router to find the default IP address.)
    2. Sign in with your user name and password, then look for a setting that says MAC Address Filter or something similar.
    3. Add the MAC address you wrote down for your PC to the access list and save your changes.
    On your PC, try to connect to the Wi-Fi network again.

I hope it works for you to! 🙂

Tag : How to fix no internet secured windows xp , How to fix no internet secured windows 7 , How to fix no internet secured windows 8 , How to fix no internet secured windows 8.1 , How to fix no internet secured windows 10

Read more :

Sharing is caring!

How to fix no internet secured windows 7/8/10
1 vote, 5.00 avg. rating (96% score)
Loading Facebook Comments ...